Please read PPP howto if you have any problems or DOSPPPD documentation if you are advanced user. If you need to enter more information than this simple setup screen allows (eg. gateway, netmask, mtu, etc.), try external dialer setup screen or edit configuration files manualy.
PAP/CHAP username: PAP/CHAP password: If your provider doesn't require authentication, just ignore these values.	IP Address: Fixed address Dynamicaly assigned address Nameservers: 1st 2nd (optional)

Basic communication setup: COM1 COM2/4 COM3 IRQ 3 (COM2,COM4) IRQ 4 (COM1,COM3) IRQ 5 (sometimes COM3,COM4) IRQ 7 (almost unused) < 9600 bps < 19200 bps < 38400 bps < 115200 bps Advanced communication setup: special base address: (0x???) use default base address for selected COM port (1...0x3f8, 2...0x2f8, 3...0x3e8, 4...0x2e8) Note: When using COM4, you have to enter base address manualy! Data transfer mode: (databits/parity/stopbits) Modem init string: (try ATZ,AT&F,AT&F0...) Dialing method: Tone dial (ATDT) Tone dial, no dialtone (ATX3DT) Pulse dial (ATDP) Bohmen und Mahren Telekom 1944-1998 (ATX3DP)

Phone number: Terminal window: Show terminal window Login script: Try following dialogue Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Wait for: Reponse: Following macros can be used: \r - end of line, \u - send PPP username, \p - send PPP password, \w - wait 1 second, \\ - send \ character.